Please send the support team a log file by the following steps: 1. Run Mac Bluray Player, tick 'Debug mode' from Help menu. 2. Play the disc/file. 3. Wait a moment, a log file will be created on your Desktop. 4. You will find the log file, please send it to [email protected].

Please send our support team a screenshot of the "Device I/O speed rate" by the following steps:
1. Run Mac Blu-ray Player, and tick the "Performance Test" under the "Help" menu.
2. Play the Blu-ray film and wait processing for a couple seconds.
3. Then the "Performance Test" dialogue will pop up, which shows the "Device I/O speed rate".
4. Snapshot the dialogue and send it to [email protected].

You can do by the following steps: First, open system preferences of Mac. Second, open CDs&DCDs under Hardware. Third, Choose Mac Blu-ray Player as default player for the item “when you insert a video DVD”.

Please try the steps below: Mac Blu-ray Player > Preferences> Audio, and then please click on "Use S/PDIF when available". After setting this, you will get the pass through of DTS 7.1.

You can do by the following steps: Mac Blu-ray Player> Preferences> Blu-ray, and then please un-tick "Sort Titles" and try it again.

If you want to play blu-ray discs on Mac, then you need a blu-ray drive which can support blu-ray discs. If your blu-ray disc just ejected by your Mac, then it is highly possible that your drive doesn't support blu-ray discs. Here below is the blu-ray drive which works like a charm with our software: click here

Many users have such doubts that why Mac Blu-ray Player need to access into Internet during Blu-ray Disc decryption. We would like to say that this method is the best way to help all users saving decrypting time and optimizing our service.
1.One Blu-ray Disc only need one decrypting process. The users who have the same disc will not do decryption once again. This can be the fastest solution to the increasingly faster Internet connection.
2.Some cases, like clients that are not updated fail to open discs, will be wiped off. This makes it possible for Mac Blu-ray Player to open new discs without being updated sometimes.
3.Protections are getting better and better, for their designers learn the decrypters in our competitors products and counter attack as well. There is no counter measure to our system hidden on our servers. Actually, we are affected by the evolution of the game as well, but at least, there is a little bit “help” to the protectors.
4.Better for users’ sake, decryption data in Mac Blu-ray Player will be covered, so Internet connection will not be needed for some discs. A chart with BD+ generations and the conditions will be published when an Internet connection is needed.
In view of the above, Internet connection will be needed by the new discs.

System Requirements:
Mac: OS X 10.5+ to 10.9, Intel Core2 Duo 2.4GHz processor or higher recommended, 512 MB or higher recommended, 250 MB of free disk space. A internal or external Blu-ray drive.USB≥ 2.0 or FireWire≥ 400,Internet Connection.
PC: Windows XP/Vista/7, Intel Core2 Duo 2.4GHz processor or equivalent AMD Athlon™ processor or higher recommended, 512 MB or higher recommended, 250 MB of free disk space.A internal or external Blu-ray drive,Internet Connection.

No. Mac Blu-ray Player can play not only Blu-ray discs but also DVDs, music, video, audio and photo. All media formats supported here: Blu-ray, DVD, VideoCD, MOV, MKV, AVI, FLV, WMV, MP4, MPEG, RMVB, MP3, WMA, AAC, AC3 and more.

Mac Blu-Ray Player has two versions: Mac version and Windows version. You can choose the right version to match your computer system.

Mac Blu-ray Player can directly play Blu-ray and DVD movie without any quality loss. It allows full preservation of all audio tracks (like DTS HD Master Audio, Dolby TrueHD Audio, etc.), subs streams, chapter markers and videos.

Please just click on "Cancel" button when asked to register and you will get our free version. Mac Bluray Player is sold as "try-before-you-buy" software. Free version has watermark while playing Blu-Ray discs. This functional limitation will disappear after you purchase the software. Other file formats like MOV, MKV, AVI, FLV, WMV, MP4, MPEG, RMVB, MP3 are 'watermark free'. NO 30 days time limited, so you have enough time to verify the program's functionality.

If indicated, it means that your Blu-ray Disc has been scratched or the data has been corrupted, so the Mac Blu-ray Player can't read the information on the disc.

When you playback Blu-ray films, about 4-5 seconds are needed to remove the Blu-ray protection with network. After the decryption,internet connection will not be required anymore. Please let us know which country you come from, because our network servers have been placed just in United States now. In some areas, the link to the network needs long time, so we will increase the number of servers in other areas as soon as possible to enhance the networking speed in different countries.

Mouse failed to control the features that a Blu-ray Disc provides. Because some Blu-ray Disc titles forbid using a mouse to control the selection of content. Solution: Please use the keyboard instead of the mouse to control the selection movements.

It could be a software/ hardware conflict. Please try the following to solve this issue.
1) Reinstall Mac Blu-ray Player.
2) Update to the latest patch (Click update inside Mac Blu-ray Player)
3) Close other applications when running
If the situation persists, please contact Mac Blu-ray Player Technical Support.

You need to get the log file and sent it to us. You can get the file in this way:
1. Run Mac Blu-ray Player, and tick 'Debug Mode' from Help menu.
2. Play the disc.
3. Wait a moment, several files will be created on your Desktop.
4. Find the log file and send it to us.

First of all, play the Blu-ray Disc, and make sure that you have a Blu-ray driver which is connected to the network. Now we add the debug mode for our users, and you can intercept a part of the video file from the disc with playback unusual. You can get this file by below way:
1. Run Mac Blu-ray Player, tick 'Debug Mode' from Help menu.
2. Play the disc.
3. Wait a moment, several files will be created on your Desktop.
4. Upload the .m2ts file ( about 50MB ) to http://www.filedropper.com, share the uploaded link with us and send log file to us by email.

Usually our confirmation email with the registration code is sent by the third party after you purchasing the software. You can first have a check of your spam box and it may be blocked by your mailbox. If you still can't find it there, please provide your order number or purchasing email to contact us at [email protected].

By our company regulation, one license could only be used on one single computer. Double systems or multiple users on one computer will be considered as different computers working. If you want to use on two more computers, please contact us at [email protected] and we will give you the purchasing link for the second.

You can do by the following steps:
1.Run Mac Blu-ray Player, a Registration dialogue will pop up.
2.Enter Email Address and Registration Code and click "Register".
When doing the registration, please make sure that there is no space on the left/right of you email/code. We recommend you copy/paste your email and code to the register-window.

The Mac Blu-ray Player will pop up a dialogue which reminds you the product have a updated version. You can choose to update when your Mac or PC connects to the Internet. The update is totally free for any user who has purchased the product, except customization versions for certain local .
(This notification will not appear in the Mac Blu-ray Player Advanced version.)

There are five times each year for Macgo registration code activation. If registration code activation is outnumbered, it will present a tip " Registration failed. Your registration code activation limit is reached." The registration code purchased from our website can only be used by the purchaser him/her self. Please do not leak or give the registration code to others.

You can download it again from the website if you delete it or meet some problems and want to install it again. The registration code will be automatically registered after you have installed and run it. You have got the lifetime right of use once you have purchased the Mac Blu-ray Player.

We recommend that you can update the version at best. Because it may not be able to play Blu-ray Disc if you declined to update Mac Blu-ray Player. Mac Blu-ray Player needs to update because the AACS key requires periodical updates for content protection reasons. Blu-ray Discs have adopted AACS (Advanced Access Content System) to protect the digital content. AACS keys are required to play some Blu-ray Discs titles.